Filter
Top Products
10 VH-2402S User Interface VH-2402S
Device Control Menu
Port Configuration Enables any port, enables/disables flow control, and sets
communication mode to auto-negotiation, full duplex or half
duplex.
Port Information Displays operational status, including link state, flow control
method, and duplex mode.
Spanning Tree
Configuration
Enables Spanning Tree Algorithm; also sets parameters for
hello time, maximum message age, switch priority, and
forward delay; as well as port priority and path cost.
Spanning Tree
Information
Displays full listing of parameters for the Spanning Tree
Algorithm.
Mirror Port
Configuration
Sets the source and target ports for mirroring.
Port Trunking
Configuration
Specifies ports to group into aggregate trunks.
IGMP Configuration Configures IGMP multicast filtering.
BStorm Control
Configuration
Allows you to enable broadcast storm control and set the
packet-per-second threshold.
Extented Bridge
Configuration
Displays/configures extended bridge capabilities provided by
this switch, including support for traffic classes, GMRP
multicast filtering, and VLAN extensions.
802.1P Configuration Configures default port priorities and queue assignments.
802.1Q VLAN
Base Information
Displays basic VLAN information, such as VLAN version
number and maximum VLANs supported.
802.1Q VLAN Current
Table Information
Displays VLAN groups and port members.
802.1Q VLAN Static
Table Configuration
Configures VLAN groups via static assignments, including
setting port members, or restricting ports from being
dynamically added to a port by the GVRP protocol.
Port Assignment
VLAN Configuration
Displays/configures port-specific VLAN settings, including
PVID, ingress filtering, and 802.1Q trunks.
Multicast Router Port
Information
Displays the ports on the switch attached to a neighboring
multicast router/switch for each VLAN ID.
Static Multicast Router
Port Cfg
Assigns ports that are attached to a neighboring multicast
router/switch.
IGMP Member Port
Configuration
Assigns ports that are attached to hosts who want to receive
a specific multicast service.
Port Security
Configuration
Allows you to enable and configure port security for the
switch.
Network Monitor Menu
Port Statistics Displays statistics on network traffic passing through the
selected port.
RMON Statistics Displays detailed statistical information for the selected port
such as packet type and frame size counters.
Unicast Address Table Provides full address listing, as well as search and clear
functions.
Selection Description