Filter
Top Products
34 VH-2402S User Interface VH-2402S
Viewing the Current Spanning Tree Configuration
The Spanning Tree Information screen displays a summary of the STA
information for the overall bridge or for a specific port or module. To make
any changes to the parameters for the Spanning Tree, use the Spanning
Tree Configuration menu.
Figure 2-25. Spanning Tree Information
FastForwarding ENABLED This parameter is used to enable/disabled the Fast
Spanning Tree mode for the port. In this mode,
ports skip the Blocked, Listening and Learning
states and proceed straight to Forwarding.
FastForwarding enables end-node workstations
and servers to overcome time-out problems when
the Spanning Tree Algorithm is implemented in a
network. Therefore, FastForwarding should only be
enabled for ports that are connected to an end-
node device.
Vertical Horizon Local Management -- VH-2402S
Spanning Tree Information : Selection Menu
STA Bridge Information ...
STA Port Information ...
<OK>
Use <TAB> or arrow keys to move. <Enter> to select.
Parameter Default Description