Filter
Top Products
9033645-01 VH-2402S User Interface 47
Port Priority Configuration
The default priority for all ingress ports is zero. Therefore, any inbound
frames that do not have priority tags will be placed in the low priority
output queue. Default priority is only used to determine the output queue
for the current port; no priority tag is actually added to the frame. You can
use the 802.1P Port Priority Configuration menu to adjust default priority
for any port as shown below:
Figure 2-34. 802.1P Port Priority Configuration
Vertical Horizon Local Management -- VH-2402S
802.1P Port Priority Configuration :
Unit 1 Port 1 - 12
Port Default Ingress Number of Egress
User Priority Traffic Class
----------------------------------------------------------
1 0 2
2 0 2
3 0 2
4 0 2
5 0 2
6 0 2
7 0 2
8 0 2
9 0 2
10 0 2
11 0 2
12 0 2
<APPLY> <OK> <CANCEL> <PREV UNIT> <NEXT UNIT> <PREV PAGE> <NEXT PAGE>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
Port Numeric identifier for switch port.
Default Ingress User
Priority
Default priority can be set to any value from 0~7, where 0~3
specifies the low priority queue and 4~7 specifies the high priority
queue.
Number of Egress
Traffic Classes
Indicates that this switch supports two priority output queues.