Filter
Top Products
9033645-01 VH-2402S User Interface 43
Configuring Broadcast Storm Control
Use the Broadcast Storm Control Configuration screen to enable
broadcast storm control for any port on the switch, as shown below:
Figure 2-31. Broadcast Storm Control Configuration
Vertical Horizon Local Management -- VH-2402S
Broadcast Storm Control Configuration
: Unit 1 Port 1-12
Broadcast control on all ports : [Enable] [Disable]
Port Threshold Broadcast Control
-------------------------------------------------------
1 500 ENABLED
2 500 ENABLED
3 500 ENABLED
4 500 ENABLED
5 500 ENABLED
6 500 ENABLED
7 500 ENABLED
8 500 ENABLED
9 500 ENABLED
10 500 ENABLED
11 500 ENABLED
12 500 ENABLED
<APPLY> <OK> <CANCEL> <PREV UNIT> <NEXT UNIT> <PREV PAGE> <NEXT PAGE>
Use <TAB> or arrow keys to move. <Enter> to select
Parameter Description
Broadcast Control on
All Ports
Allows you to enable/disable broadcast storm control for all ports
on the switch.
Threshold The packet-per-second threshold for broadcast packets on the
port. (Default is 500 pps.)
Broadcast Control Enables/disables broadcast control for the port. When enabled,
the switch drops all broadcast packets if the packet-per-second
threshold is exceeded. (Default is Enabled.)