Filter
Top Products
44 VH-2402S User Interface VH-2402S
Configuring Bridge MIB Extensions
The Bridge MIB includes extensions for managed devices that support
Traffic Classes, Multicast Filtering and Virtual LANs. To configure these
extensions, use the Extended Bridge Configuration screen as shown
below:
Figure 2-32. Extended Bridge Configuration
Vertical Horizon Local Management -- VH-2402S
Extended Bridge Configuration
Bridge Capability : (Read Only)
Extended Multicast Filtering Services : NO
Traffic Classes : YES
Static Entry Individual Port : YES
Configurable PVID Tagging : YES
Local VLAN Capable : NO
Bridge Settings :
Traffic Class : TRUE
VLAN Learning : SVL
GMRP : DISABLED
GVRP : DISABLED
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move. <Space> to scroll options.
Parameter Description
Bridge Capability
Extended Multicast
Filtering Services
Indicates that this switch does not support the filtering of
individual multicast addresses based on GMRP (GARP Multicast
Registration Protocol). Note that this function is not available for
the current firmware release.
Traffic Classes This switch provides mapping of user priorities to multiple traffic
classes. (Refer to 802.1P Configuration.)
Static Entry
Individual Port
This switch enables static filtering for unicast and multicast
addresses. (Refer to Network Monitor Menu / Static Unicast
Address Table Configuration and Static Multicast Address Table
Configuration.)
Configurable
PVID Tagging
This switch allows you to override the default PVID setting (Port
VLAN ID used in frame tags) and its egress status (VLAN-Tagged
or Untagged) on each port. (Refer to Port Assignment VLAN
Configuration.)
Local VLAN
Capable
This switch does not support multiple local bridges (that is,
multiple Spanning Trees).