Filter
Top Products
9033645-01 VH-2402S User Interface 23
Console Login Configuration
Use the Management Setup: Console Login Configuration to restrict
management access based on specified user names and passwords, or
to set the invalid password threshold and timeout. There are only two user
types defined, ADMIN (Administrator) and GUEST, but you can set up to
five different user names and passwords. Only Administrators have write
access for parameters governing the switch. You should therefore assign
a user name and password to the default Administrator as soon as
possible, and store it in a safe place. (If for some reason your password
is lost, or you cannot gain access to the System Configuration Program,
contact Enterasys Technical Support for assistance.) The parameters
shown on this screen are indicated in the following figure and table.
Figure 2-15. Console Login Configuration
Vertical Horizon Local Management -- VH-2402S
Console Login Configuration
Password Threshold : 3
Lock-out Time (in minutes) : 0
User Type User Name Password
------------------------------------------------
1. ADMIN : admin
2. GUEST : guest
3.
4.
5.
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Default Description
Password Threshold 3 Sets the password intrusion threshold which limits
the number of failed logon attempts.
Range : 0~65535
Lock-out Time 0 The time (in seconds) the management console
will be disabled, due to an excessive number of
failed logon attempts.
Range : 0~65535
Admin* name: admin
password: null
Administrator has access privilege of Read/Write
for all screens.
Guest* name: guest
password: null
Guest has access privilege of Read Only for all
screens.
* Passwords can consist of up to 11 alphanumeric characters and are not case
sensitive.