Filter
Top Products
9033645-01 VH-2402S User Interface 27
Configuring the Switch
The Device Control menu is used to control a broad range of functions,
including port configuration, Spanning Tree support for redundant
switches, port mirroring, multicast filtering, and Virtual LANs. Each of the
setup screens provided by these configuration menus is described in the
following sections.
Figure 2-19. Device Control Menu
Vertical Horizon Local Management -- VH-2402S
Device Control Menu
Port Configuration ... Extended Bridge Configuration ...
Port Information ... 802.1P Configuration ...
Spanning Tree Configuration ... 802.1Q VLAN Base Information ...
Spanning Tree Information ... 802.1Q VLAN Current Table Information ...
Mirror Port Configuration ... 802.1Q VLAN Static Table Configuration ...
Port Trunking Configuration ... Port Assigment VLAN Configuration ...
IGMP Configuration ... Multicast Router Port Information ...
BStorm Control Configuration ... Static Multicast Router Port Cfg ...
Port GARP Configuration ... IGMP Member Port Configuration ...
Port GMRP Configuration ... Port Security Configuration ...
<OK>
Use <TAB> or arrow keys to move. <Enter> to select.
Selection Description
Port Configuration Sets communication parameters for ports.
Port Information Displays current port settings and port status.
Spanning Tree
Configuration
Configures the switch, its ports and modules to participate in a
local Spanning Tree.
Spanning Tree
Information
Displays the current Spanning Tree configuration for the switch,
its ports and modules.
Mirror Port
Configuration
Sets the source and target ports for mirroring.
Port Trunking
Configuration
Specifies ports to group into aggregate trunks.
IGMP Configuration Configures IGMP multicast filtering.
BStorm Control
Configuration
Allows you to enable broadcast storm control and set the packet-
per-second threshold.
Port GARP
Configuration*
Configures generic attribute settings used in the spanning tree
protocol, VLAN registration, multicast filtering.
Port GMRP
Configuration*
Configures GMRP multicast filtering.
Extended Bridge
Configuration
Displays/configures extended bridge capabilities provided by this
switch, including support for traffic classes, and VLAN extensions.
802.1P Configuration Configures default port priorities and queue assignments.