Filter
Top Products
Setting Up Network Projection 59
the option and press Enter. When you’re done, highlight Finish
and press
Enter.
Note that the SSID is case-sensitive (if you enter the name in
uppercase on the projector, you must type it the same way on the
computer connecting to the projector).
7. If you want to prevent the SSID from being displayed on the
standby screen, set the
SSID Display option to Off.
8. To prevent the IP address from appearing on the standby screen,
set the
IP Address Display setting to Off.
9. When you’re done making these settings, highlight the
Return
button at the top of the screen, then press
Enter. Choose Setup
Complete
and press Enter, then choose Yes and press Enter to
save your settings.
Now you’re ready to set up your computer to project wirelessly. Go to
“Configuring the Network Settings for Windows” on page 60, or
“Setting Up Your Mac for Ad Hoc Mode” on page 62.