Filter
Top Products
82 Setting Up Network Projection
4. Press
Enter to show the menu, then highlight WEP and press
Enter.
5. For the WEP encryption setting, highlight
128Bit or 64Bit and
press
Enter.
6. For Format, highlight
ASCII to enable text input or HEX to
enable hexadecimal input, then press
Enter.
7. If you chose
64Bit, choose Key ID 1, 2, 3, or 4.
Highlight the
Encryption key text box that corresponds to the
Key ID you selected, then press
Enter. Use the buttons to
select individual letters; then press
Enter to input a character. To
add a blank space or to navigate backward and forward through
the input text, highlight the arrows and press
Enter. To toggle
symbol settings or capital letters, highlight the option and press
Enter. When you’re done, highlight Finish and press Enter.
note
Text input for WEP
encryption varies with
different access points; check
with your network
administrator. Try ASCII
first. If that doesn’t work,
try Text2 and then Text3.