Filter
Top Products
36
7. Lower the new ink cartridge into its holder with the label facing up and toward
the back of the printer.
8. Press down the ink cartridge clamp until it locks in place.
9. Press the
E load/eject button again and close the printer cover. The printer moves
the print head and begins charging the ink delivery system.
The
Ppower light flashes and the printer makes noise. Charging takes about one
minute. When it’s finished, the
Ppower light stops flashing and stays on.
Never turn off the printer while the
P
power light is flashing,
unless the printer hasn’t moved or made noise for more than
5 minutes.
basics.book Page 36 Thursday, September 23, 1999 10:42 AM