Filter
Top Products
Setting Up the Projector
27
Connecting the Mouse and Serial Cables
To use the remote control as a mouse or use the EMP Link V
software, follow the steps below. This illustration shows the
connections you’ll be making:
1. Connect the small end of the main cable to the projector’s
Mouse/Com
port.
2. To use the remote control as a wireless mouse, connect one end of
the projector’s Mac mouse or USB cable to the
MOUSE
terminal
on the square end of the main cable.
3. Disconnect your Macintosh’s mouse cable. Connect the other end
of the projector’s Mac mouse or USB cable to the mouse or USB
port on your Macintosh.
Mouse/Com port
Mac or
USB cable
Mac serial cable
main cable