Filter
Top Products
54
Using the Projector
Using the Cursor/Stamp Arrow
You can use the cursor stamp tool as a pointer and place cursor stamps
anywhere on your screen. You can choose from three types of stamps.
1. To activate the cursor stamp, press button
1
on the remote
control. A green pointer appears in the upper left corner of the
screen. To try a different stamp, press
1
again. Press
1
again to see
the third one.
2. Press the side of the
Enter
button to move the pointer wherever
you want it.
3. To “paste” the pointer on the screen, press down in the center of
the
Enter
button. You can then continue to work with another
pointer, moving it around the screen or pasting it wherever you
want.
4. To erase the pointers pasted on the screen, press button
5
.
5. To cancel the cursor stamp feature, press
Esc
.
Drawing Boxes
You can draw outline boxes on the screen to highlight areas of your
presentation or video.
1. To activate the box tool, press button
2
on the remote control. A
small pink square appears in the upper left corner of the screen.
This is the “box-drawing” tool.
2. Press the side of the
Enter
button to move the square where you
want to begin drawing the box.
3. Press down in the center of the
Enter
button. You see a corner
mark on the screen; this defines one corner of the box.
4. Press the side of the
Enter
button to drag the square to where you
want the opposite corner of the box to be.
5. Press down in the center of the
Enter
button. You see the box
outlined on the screen.
You can continue placing boxes on the screen by repeating steps 2
through 5.
note
You can use the projector’s
Effect menu to select
different cursor stamps.
See page 68.
note
You can use the projector’s
Effect menu to change the
color and shape of the box.
See page 68.