Filter
Top Products
42
Using the Projector
What To Do If You See a Blank Screen
If you see a blank screen or a blue screen with the message
No Signal
after turning on your computer or video source, do one of the
following:
■
Make sure the cables are connected correctly, as described in
Chapter 1.
■
Make sure the power light is green and not flashing and the lens
cap is off.
■
If you’ve connected more than one computer and/or video source,
you may need to press the
Computer
or
Video
button on top of
the projector to select the correct source. (Allow a few seconds for
the projector to sync up after pressing the button.)
■
Try restarting your computer.
If you’re using a PowerBook:
You may need to set up your system to display on the projector screen
as well as the LCD screen. Follow these steps:
1. From the Apple menu, select
Control Panels
, then click
Monitors and Sound.
2. Click the
Arrange
icon.
3. Drag one monitor icon on top of the other.
Click here
Drag one monitor
icon on top of
the other