Filter
Top Products
70
Fine-tuning the Projector
Menu item Description
Keystone Adjusts a trapezoid-distorted image to a 4:3 rectangle,
correcting up to a ± 30
°
tilt. See page 47.
P in P Selects the image source for the P in P subscreen. See
page 52 for more information.
No-Signal
Msg
Specifies whether no screen, a black screen, a blue
screen, or a user logo/image is displayed when no video
signals are being received.
Prompt Displays a temporary message (computer or video)
identifying the image source when set to
ON
.
A/V Mute Displays a blue, black, or user logo screen when the
audio/video is turned off.
BNC Specifies the format for BNC input. If the source is a
computer, select
RGB
. If the source is a video device,
select
YCrCb
.
Sleep mode Enables or disables sleep mode. When sleep mode is
on, the projector turns the lamp power off if the
projector has not received any image signals from the
input source for 30 minutes. Press the
Power
button to
resume projecting.
Reset Returns all Setting menu items to their default settings.
Select this item and then press the
Enter
button to
display the confirmation screen. Next, select
Yes
and
press
Enter
to reset the Setting menu.
If you change your mind, select
No
and press
Enter
to
clear the confirmation screen without changing any
settings.