Filter
Top Products
66
Fine-tuning the Projector
Saving and Recalling Computer Settings
When you are projecting from a computer source, you can save and
recall settings (resolution, tracking, sync signal, and position) for up to
five different sessions. This is useful if you use more than one
computer with the projector; you can save the settings for each one
and recall them when necessary. Follow these steps to save the current
session settings:
1. Press the
Menu
button on the control panel or remote control to
display the Main menu.
2. Press
Enter
to select the Video menu.
3. Use the down arrow (control panel) or
Enter
button to move
down to the
Preset
option and press
Enter
. You see the Preset
Selection menu with the current resolution setting displayed.
4. Press
Enter
to assign it to the next available number.
5. Press
Enter
again. When you see the “Overwrite?” prompt, select
Yes
or
No
and press
Enter
.
6. Press
Esc
to return to the Video menu.
When you want to use a saved setting, press the
Preset
button on the
remote control. You see the setting for session number 1 displayed in
yellow at the top right of the screen. To select another number, press
the
Preset
button again until the setting number you want is
displayed. The projector will reset itself according to the selected
setting.
note
If you want to overwrite an
existing setting, move to the
setting and press
Enter
.
When the confirmation
message appears, choose
Yes
and press
Enter
.