Filter
Top Products
Fine-tuning the Projector
73
Capturing and Saving the Image
Follow these steps to capture and save a logo or image:
1. Display the image (with the projector).
2. Press the
Menu
button on the control panel or remote control to
display the Main menu.
3. Press the down arrow (control panel) or press down on the
Enter
button (remote control) to move to the
Capture
menu.
4. Press
Enter
(control panel or remote control) to highlight the
User’s Logo Capture
option and press
Enter
again to select it.
You see the message “Do you use the present image as a user’s
logo?”
5. Select
Yes
and press
Enter
. A selection box appears over the
image.
6. Use the arrow buttons on the control panel or the
Enter
button
on the remote control to select the area of the image you want to
use as the logo. Once you have selected the entire area, press
Enter
.
7. When the message “Do you use this image?” appears on the
screen, select
Yes
and press
Enter
. If you want to change the area
selected, select
No
,
press
Enter
and repeat steps 4 through 6.
8. Use the arrow buttons on the control panel or the
Enter
button
on the remote control to select a zoom rate, and then press
Enter
.
9. When the message “Do you save the user’s logo?” appears, select
Yes
and press
Enter
. If you do not want to save the logo, select
No
.
10. When you see the message “Saving the user’s logo is completed,”
press the
Menu
or
Enter
button to return to the Capture menu.
11. Press
Menu
or
Esc
to return to the Main menu.
note
Saving the logo may take a
few moments. Do not use the
projector or other sources
(computer, video, speaker,
etc.) while the logo is being
saved.