Filter
Top Products
62
Fine-tuning the Projector
3. When the menu you want is highlighted, press the
Enter
button
to select it.
The highlight moves to the first option for that menu.
4. Press the up or down arrows (control panel) or up or down on the
Enter
button (remote control) to scroll through the options.
5. Press either the left or right arrow buttons (control panel) or right
or left on the
Enter
button (remote control) to change a setting
on one of the submenus.
6. If you want to go back to the default settings on any menu, select
Reset
, press
Enter
, select
Yes
, and then press
Enter
.
7. Press the
Esc
button to go back to the main menu. Your changes
are saved automatically.
8. Press the
Menu
button to exit the menu system.
The options available in each of the menus are described below.
note
Some options are limited to
being enabled (turned on) or
disabled (turned off).
Enabled options are
indicated by a green light.
Disabled options are blank
.