Filter
Top Products
52
Using the Projector
Stopping Action
You can use the remote control to stop the action in your video or
computer.
■
Press the
Freeze
button to stop the action and keep the current
image on the screen. The sound will continue.
■
Press the
Freeze
button again to re-start it.
Turning Off the Picture and Sound
You can use the
A/V Mute
button on the remote control or control
panel to turn off the image (and sound) and darken your screen. This
is useful if you want to temporarily re-direct your audience’s attention
without the distraction of a bright screen.
■
To turn off the picture, press the
A/V Mute
button. The screen
goes dark.
■
To turn the image back on, press the button again.
You can also assign a user logo or image to the
A/V Mute
button so it
displays on the screen whenever you press the
A/V Mute
button. See
“Creating a Screen Logo or Image” on page 72.
Displaying Picture-in-Picture Video
You can open a small video window on your computer image, and
view a video at the same time as your computer presentation. Make
sure you have connected your VCR or other video source as described
in Chapter 1.
1. Press the
P in P
button on the remote control. The screen may go
dark for a moment, and then your video image appears in a small
window on the screen. A menu appears in the lower left corner of
the screen.
2. Press the side of the
Enter
button (or grasp it between your
thumb and finger) to move the video window on the screen.
You can use the
E-Zoom
button to enlarge or reduce the video
window.
E@sy-MP
Stop action
Display
picture in
picture
Turn off
picture
and
sound
note
You can also select the P in P
source through the projector’s
Setting menu. See page 69.