Filter
Top Products
74
Fine-tuning the Projector
Assigning the Image to the No-Signal Message
and/or A/V Mute Button
After your image is saved, you can set it up as the no-signal message
and/or the screen that’s displayed when you press the
A/V Mute
button.
1. Press the
Menu
button on the control panel or remote control to
display the Main menu (if not already displayed).
2. Select the
Setting
menu and then press the
Enter
button on the
control panel or remote control.
3. Press the down arrow (control panel) or press down on the
Enter
button (remote control) to highlight
No-Signal Msg
.
4. Press the right arrow or use the
Enter
button to select
Logo
. This
sets your image as the screen displayed when the projector is not
receiving a signal.
5. If you want to set up your image as the A/V mute, use the down
arrow or
Enter
button to move down to the
A/V Mute
option
and select
Logo
.
6. Press
Esc
or the
Menu
button.
Now you can press the
A/V Mute
button on the control panel or the
remote control to display the user logo or image. Press it again to turn
off the logo.