Filter
Top Products
114
114 | Printing With Epson Drivers for Macintosh
• Drying Time per Print Head Pass
lets you print with non-Epson
media and avoid smearing the ink. You can make the print head
wait up to 5 seconds after each pass to allow ink to dry on the page.
• Paper Feed Adjustment helps reduce banding. Choose a lower
value if you see white lines on your prints, or a higher value if you
see dark lines.
• Paper Thickness helps reduce vertical banding and creates a
sharper image when printing on unusually thick or thin paper.
• Paper Suction lets you decrease the paper suction level when
printing on thinner papers (less than 12 lb), such as CAD drafting
paper.
• Platen Gap lets you fine-tune the setting for various paper
thicknesses.
• Roll Paper Back Tension lets you adjust the tension when printing
on roll paper. Change the value if you find wrinkles on your
printouts when
Auto is selected.
Choosing Roll Paper Options
If you are printing on roll paper, make sure you choose one of the roll paper
options as the
Paper Size setting, as described on page 106. In addition,
you need to check these settings for various cutting and feeding options.
1. Select
Roll Paper Option from the drop-down menu. You see this
screen:
2. Choose one of the following
Auto Cut settings: