Filter
Top Products
217
Using the Optional Auto Take-Up Reel | 217
Printing Using the Auto Take-Up Reel
Once the Auto Take-Up Reel is installed and paper is attached to it, you can
use it to take up your prints.
1. Set the
Auto switch to Forward or Backward, depending on how you
set up the paper.
2. Send a print job to the printer. The Auto Take-Up Reel takes up the roll
paper 1/4 to 1/2 turn at a time.
3. When you are ready to remove your prints, set the
Auto switch to Off.
4. Press the button to cut the paper.
WARNING: Do not touch
the Auto Take-Up Reel
while it is operating; doing
so may result in injury.
Turn off the Auto Take-Up
Reel before removing the
reel; if the reel operates
unexpectedly, bodily
injury may occur.