Filter
Top Products
Using the Printer Software with Macintosh 133
EPSON AcuLaser C3800 User's Guide
Using the Reserve Job Function
The Reserve Job function allows you to store print jobs on the printer’s memory and to print
them later directly from the printer’s control panel. Follow the instructions in this section to
use the Reserve Job function.
Note:
You need to keep sufficient RAM disk capacity in order to use the Reserve Job function. To enable
RAM disk, you have to set the RAM Disk setting on the control panel to Normal or Maximum. We
recommend installing an optional memory to use this function. For instructions about increasing
your printer’s memory, see "Installing a memory module" on page 220.
The table below gives an overview of the Reserve Job options. Each option is described in
detail later in this section.
Jobs stored on the printer’s memory are handled differently depending on the Reserve Job
option. Refer to the tables below for details.
Reserve Job Option Description
Re-Print Job Lets you print the job now and store it for later reprinting.
Verify Job Lets you print one copy now to verify the content before printing
multiple copies.
Confidential Job Lets you apply a password to the print job and save it for later printing.
Reserve Job
Option
Maximum Number
of Jobs
When Maximum is
Exceeded
When RAM Disk is Full
Re-Print Job +
Verify Job
64 (combined total) Oldest job
automatically
replaced with newest
Oldest job automatically
replaced with newest
Confidential Job 64 Delete old jobs
manually
Delete old jobs manually
Reserve Job
Option
After Printing After Turning Off Printer or Using Reset All
Re-Print Job Data remains on
the printer’s
memory
Data is cleared
Verify Job
Confidential Job Data is cleared