Filter
Top Products
Using the Control Panel 180
EPSON AcuLaser C3800 User's Guide
Quick Print Job Menu
This menu allows you to print or delete print jobs that were stored in the printer’s memory
using the Quick Print Job feature (Re-Print Job and Verify Job) of the printer driver’s
Reserve Job function. For instructions on using this menu, see "Using the Quick Print Job
Menu" on page 203.
Confidential Job Menu
This menu allows you to print or delete print jobs stored in the printer’s memory using the
Confidential Job feature of the printer driver’s Reserve Job function. You need to enter the
correct password to access this data. For instructions on using this menu, see "Using the
Confidential Job Menu" on page 204.
USB Menu
These settings control communication between the printer and the computer when using
the USB interface.
*1
After this item is changed, the setting value takes effect after a warm boot or after the power is turned on
again. While it is reflected in the Status Sheet and EJL read-back, the actual change takes effect after a
warm boot or after the power is turned on again.
*2
Available only when USB I/F is set to On.
*3
Available only when a USB external device with D4 support is connected. The contents of the settings
depend on the USB external device settings.
*4
If the Get IPAddress setting is set to Auto, this setting cannot be changed.
Item Settings (default in bold)
USB I/F
*1
On, Off
USB Speed
*1*2
HS, FS
Get IP Address
*2*3
Panel, Auto, PING
IP
*3*4*5
0.0.0.0 to 255.255.255.255
SM
*3
0.0.0.0 to 255.255.255.255
GW
*3
0.0.0.0 to 255.255.255.255
NetWare
*3
On, Off
AppleTalk
*3
On, Off
MS Network
*3
On, Off
Bonjour
*3
On, Off
USB Ext I/F Init
*2*3
-
Buffer Size
*1*2
Normal, Maximum, Minimum