Filter
Top Products
Troubleshooting 278
EPSON AcuLaser C3800 User's Guide
The font on the printout is different from that on the screen
The printer fonts cannot be installed
The edges of texts and/or images are not smooth
Cause What to do
The PostScript screen fonts are not installed. The PostScript screen fonts must be installed on the
computer that you are using. Otherwise, the font
that you select is substituted by some other font for
display on the screen.
For Windows users only
The Send TrueType fonts to printer according
to the font Substitution Table setting on the
Fonts sheet of the printer’s Properties dialog
box is turned on, but the TrueType fonts are
not replaced by the printer fonts.
(For Windows Me or 98)
The appropriate substitution fonts are not
correctly specified on the Device Settings
sheet of the printer’s Properties dialog box.
(For Windows XP. XP x64, or 2000)
If the Send TrueType fonts to printer according to the
font Substitution Table setting on the Fonts sheet of
the printer’s Properties dialog box is turned on,
TrueType fonts are replaced by the printer fonts
before they are printed. Specify the appropriate
substitution fonts using the Font Substitution Table.
Specify the appropriate substitution fonts using the
Font Substitution Table.
Cause What to do
The Emulation menu in the printer’s Control
Panel is not set to PS3 for the interface that
you are using.
Change the Emulation menu setting to PS3 for the
interface that you are using, then try reinstalling the
printer fonts again.
Cause What to do
The Print Quality is set to Fast. Change the Print Quality setting to Quality or Super.
The printer does not have sufficient memory. Increase the printer memory.