Filter
Top Products
Cleaning and Transporting the Printer 245
EPSON AcuLaser C3800 User's Guide
❏ Avoid using an electrical outlet that is controlled by wall switches or automatic timers.
Accidental disruption of power can erase valuable information in your computer’s and
printer’s memory.
c
Caution:
❏ Leave adequate room around the printer to allow for sufficient ventilation.
❏ Avoid locations that are subject to direct sunlight, excessive heat, moisture, or dust.
❏ Avoid using outlets that other appliances are plugged into.
❏ Use a grounded outlet that matches the printer’s power plug. Do not use an adapter plug.
❏ Only use an outlet that meets the power requirements for this printer.
For long distances
Repacking the printer
If you need to transport your printer for long distances, carefully repack it using the original
box and packing materials.
Follow the steps below to repack your printer.
1. Turn off the printer and remove the following items:
❏ Power cord
❏ Interface cables
❏ Loaded paper
❏ Imaging cartridges
❏ Installed options
2. Attach the protective materials onto the printer, then repack the printer in its original
box.
Adjusting color registration
If you transported your printer for a long distance, you need to adjust the color registration
for possible misalignment. For instructions, see "Adjusting Color Registration" on page
206.