Filter
Top Products
4-8
Using the Interface Card with Macintosh
R4C3610 Adm/G
Rev. C
A5 size CHAP4.FM
8/4/00 Pass 0
L
Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
Configuring the Interface Card Using EpsonNet
WebAssist
You can use EpsonNet WebAssist after setting the IP address of
the interface card, as described in Chapter 2.
Note:
❏ A web browser must be installed in your computer.
❏ TCP/IP must be correctly set for the computer and interface card.
❏ Do not operate EpsonNet WinAssist/MacAssist and EpsonNet
WebAssist for the printer at the same time.
❏ There are some restrictions on the characters you can use depending
on your browser. For details, see your browser or OS manual.
1. Turn on the printer with the interface card.
2. Run EpsonNet WebAssist using either method described
below.
❏
Run EpsonNet WinAssist or EpsonNet MacAssist. Click
the printer you want to configure from the list and click
the
Launch Browser
button.
❏
Open your browser, and type in the IP address of the
interface card directly. Do not run EpsonNet WinAssist
or MacAssist.
URL: http:// the IP address of the interface card/