3-20
Using the Interface Card with NetWare
R4C3610 Adm/G
Rev. C
A5 size Chap3.fm
8/4/00 Pass 0
L
Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
8. Press
Esc
.
9. Select
Queues Serviced by Printer
from the Print Server
Configuration menu and press
Enter
.
10. Select the printer that you want to use from the Defined
Printers list and press
Enter
.
11. Press the
Insert
key and assign a queue to the print server port
from the Available Queues list.
12. Specify a priority level between 1 to 10. One is top priority.
13. Press
Esc
to exit PCONSOLE.
Now go to the section “Configuring the interface card using
EpsonNet WinAssist” on page 3-28.
Making the printer environment with Bindery mode
Follow the steps below to make the printer environment under
NetWare 4.1x, Intranet Ware, and NetWare 5 with Bindery
emulation.
Note:
❏ Assign Trusteeships to users if necessary.
❏ Be sure to use PCONSOLE to set the print queue and print server
instead of using NWADMIN.
1. Turn on the printer with the interface card.