Filter
Top Products
3-48
Using the Interface Card with NetWare
R4C3610 Adm/G
Rev. C
A5 size Chap3.fm
8/4/00 Pass 0
L
Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
The following problems are common to the both Print Server
mode and the Remote Printer mode.
❏
When the power is turned on
Since access is made only to the primary server, no dial-up is
generated.
❏
When the interface card is not correctly set
Since access is made only to the primary server, no dial-up is
generated. However, if the file server/print server of the
remote network is erroneously set as the primary server, an
unnecessary dial-up might be generated. Correct the settings
to avoid this problem.
❏
During normal operation (standby/printing)
Since access is made only to the primary server, no dial-up is
generated.
❏
When the primary server is down during operation
Connection to the primary server is periodically attempted,
but no dial-up is generated. However, if the router is set to
pass SAP packets (Find Nearest Server), an unnecessary dial-
up might be generated. To avoid this, turn off the printer once,
or do not allow the router to pass SAP packets (Find Nearest
Server).
File server
(Print server)
Dial-up
router
Dial-up
router
Primary file server
(primary print server)
Printer
Local network
Remote network