Filter
Top Products
5
Using the Interface Card with Windows 98/95
5-5
R4C3610 Adm/G
Rev. C
A5 size CHAP5.FM
8/4/00 Pass 0
R
Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
Workgroup name:
Enter the workgroup name or domain name (up to 15
characters) used for the Windows network environment.
Device name:
Enter the device name (up to 12 characters). LPT1, LPT2,
LPT3, and COM cannot be used.
5. After making the settings, click
OK
. The Password dialog box
appears.
6. Enter your password (up to 20 characters) and click
OK
to
save settings. If you are entering a password for the first time,
click
Change
and set the password. For more information
about passwords, see “About passwords” on page 9-7.
Follow the on-screen instructions. After updating is complete,
refresh the configuration by selecting
Refresh
from the View
menu.
c
Caution:
Since it takes 2 or 3 minutes to send new settings to the
interface card, you must wait until the on-screen message
appears before turning off your printer.