Epson C82363 Network Card User Manual


 
2-2
Setting the IP Address
R4C3610 Adm/G
Rev. C
A5 size CHAP2.FM
8/4/00 Pass 0
L
Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
Installing TCP/IP Protocols in Your PC
Before using the interface card with TCP/IP, you must make sure
that the TCP/IP protocol is installed in your operating system.
After it is installed, you can use the computer to configure the
interface card for use with TCP/IP.
If you have already installed the TCP/IP protocol, you can skip
these steps and go to the next section Setting the IP Address
Using EpsonNet WinAssist/MacAssist on page 2-12.
Note:
The network administrator must confirm any changes made to the IP
address settings.