Filter
Top Products
3
Using the Interface Card with NetWare
3-31
R4C3610 Adm/G
Rev. C
A5 size Chap3.fm
8/4/00 Pass 0
R
Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
Using NDPS Gateway (NetWare 5)
This section contains instructions on printing using Novell
Distributed Print Services
®
(NDPS
®
) with Novell
®
NetWare
®
5
.
Novell Distributed Print Services (NDPS) is the
new generation
print services of NetWare 5.
Note:
❏ Automatic installation of NDPS is not supported.
❏ Banners cannot be printed with NDPS.
❏ The Status Monitor 2 utility cannot be used with NetWare 5 in
Windows NT 4.0.
❏ For detailed information about NDPS, see the NetWare 5 online
documentation.
Make sure of the following points before starting;
❏
When you install NetWare 5, install "IPX" ("IP" is installed by
default).
❏
When you use the interface card with Bindery (either in Print
Server mode or Remote Printer mode), you need
PCONSOLE.EXE to create bindery objects such as a Print
Server and a Print Queue object. Since PCONSOLE.EXE does
not come with NetWare 5, you need to get the file from Novell.
Outline of settings
The following are basic steps to follow in order to use the interface
card with the NDPS printing system. Detailed procedures are
described in the following sections.
1. Select the Connection Type and make the printer
environment for the Server and Clients.
2. Create an NDPS Manager object in NetWare Administrator.