Filter
Top Products
1-4
Getting Started
R4C3610 Adm/G
Rev. C
A5 size CHAP1.FM
8/4/00 Pass 0
L
Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
10BASE-T
(C82362
✽
only)
Connect the Ethernet twisted-pair (10BASE-T) cable to the RJ-45
connector on the interface card.
10BASE-T/100BASE-TX
(C82363
✽
and C82364
✽
)
Connect an Ethernet twisted-pair (Category-5) cable to the RJ-45
connector on the interface card. You can use this cable for both
10BASE-T and 100BASE-TX.
DC-IN connector (C82364✽
only)
Connect the AC adapter to the interface card.
c
Caution:
❏ Attach only one cable at a time.
❏ For interface card models C82363✽
and C82364✽, use a
Category-5 shielded twisted-pair cable to connect the
interface card, to prevent malfunctions.
Power select switch
There is a power select switch on the board of interface card
models C82363
✽
and C82364
✽
.
c
Caution:
The default position is at P for C82363✽, and at A for C82364
✽
.
Do not change the position of the switch. You must use the default
position. Otherwise, the interface card will not work correctly.
The power select switch for model C82363
✽