Filter
Top Products
A-14 Enhancing Your Printer With Options
Switching to continuous paper
Follow the steps below to switch to continuous paper loaded from
the tractor.
1. If any single sheets are in the paper path, press the Load/Eject
button to eject them.
2. Select the continuous-paper feeding, as described in Chapter
2, “Selecting a Paper Source.”
3. Make sure the paper guide’s extension flap is returned to its
original position, and push the paper guide extension all the
way in.
Switching to single sheets
To switch back to single sheets loaded from the cut-sheet feeder,
follow these steps:
1. If any continuous paper remains in the printer, press the Tear
Off/Bin button (LQ-680) or the Tear Off/Special Paper
button (LQ-680Pro) to advance the paper to the tear-off
position.
2. Tear off the printed pages.
3. Press the Load/Eject button. The printer feeds the paper
backward to the standby position. The paper is still attached
to the tractor but is no longer in the paper path.
4. Select single-sheet feeding, as described in Chapter 2,
“Selecting a Paper Source.”
5. Pull out the paper guide extension, and pull out the extension
flap if you are printing on long paper.