Filter
Top Products
Paper Handling 2-29
1. Make sure the printer is turned on. If necessary, lift up the
printer cover so you can see the paper position.
2. Load either continuous or single-sheet paper. (Press the
Load/Eject button to load continuous paper from the tractor
or a single sheet from the optional cut-sheet feeder.)
3. Hold down the Pause button for about three seconds. The
Pause light starts flashing and the printer enters the micro-
adjust mode.
4. Press the LF/FF [
] button to move the paper toward the front
of the printer, or press the Load/Eject [
] button to move the
paper toward the rear. The new loading position is set to the
position where you release the buttons.