Filter
Top Products
2-16 Paper Handling
2. Tear off all printed pages at the tear-off edge. If the perforation
is not aligned with the tear-off edge, adjust the tear-off
position using the micro-adjust feature. See “Adjusting the
tear-off position” later in this chapter.
3. When you resume printing, the printer feeds the paper back
to the top-of-form position and begins printing. (You can also
manually feed the paper back to the top-of-form position by
pressing the same button used to advance the paper.)
Using auto tear-off mode
When you turn on the auto tear-off function in the printer’s
default-setting mode or the EPSON Remote! utility, the printer
advances continuous paper to the tear-off position when you
finish printing.
The printer advances paper to the tear-off position only when it
receives a full page of data or a form-feed command and then
receives no more data for three seconds.