Filter
Top Products
Setting Up the Printer 1-13
Installing the printer software in Windows Me, 98,
95, 2000, or NT 4.0
Follow the steps below to install the printer software in
Windows Me, 98, 95, 2000, or NT 4.0:
Note:
❏ Installing the printer software for Windows 2000 or NT 4.0 may
require administrator privileges. If you have problems, ask your
administrator for more information.
❏ If you wish to make a diskette version of the printer software on your
CD-ROM, insert the CD and run the EPSETUP program. In the
dialog box that appears, click the Driver disk creation utility
button and follow the on-screen instructions.
❏ If you are using the diskette version of the EPSON software, make
a backup copy of the EPSON printer software disk or disks before
you begin installation.
❏ If the New Hardware Found screen or any other wizard appears
when you turn on your computer, click Cancel and follow the steps
below.
❏ If the Digital Signature Not Found screen appears, click Yes. If you
click No, you must reinstall the printer driver as described below.
❏ Installation time varies depending on your computer.
1. Make sure that the printer and computer are switched off.
2. Switch the PC on. Windows starts automatically. Then switch
the printer on.
3. Insert the CD-ROM containing the printer software into the
CD-ROM drive. TheAutoPlay function of the CD-ROM drive
automatically starts the installation
program on the CD-ROM.