Filter
Top Products
Specifications C-9
Continuous paper (standard and multipart): rear entry
Note:
❏ The ratio of the cut/uncut length at the perforation should be
between 3:1 and 5:1.
❏ The thickness of the perforation part when extended should be 2 mm
or less.
❏ The perforation between pages should not extend all the way to the
edges of the paper. Uncut length on the edges should be 1 mm or
more.
❏ When the horizontal and vertical perforation cuts crossing, do not
print in between 3 mm above and below the horizontal perforation
and in between 28 mm left and right the vertical perforation.
Width 101.6 to 304.8 mm
Length (one page) 76.2 to 558.8 mm
Copies 1 original + up to 5 copies
Thickness Printable area 0.065 to 0.46 mm
Gathering area up to 0.9 mm
Weight
(not multipart)
52 to 128 g/m²
Weight
(one sheet of multipart)
40 to 58 g/m²
Binding Point glue or/and paper staples on
both sides