Filter
Top Products
Paper Handling 2-17
For instructions on how to activate the auto tear-off function, see
“About Your Printer’s Default Settings” on page 4-3 or open the
EPSON Remote! utility as described in Chapter 3 and follow the
on-screen instructions. While using the default-setting mode or
the utility, also make sure the page length is set correctly for your
continuous paper.
After the paper has been advanced, tear off all printed pages and
resume printing as described in “Using the Tear Off button”
earlier in this chapter.
You can leave the auto tear-off mode on even when you are using
single sheets. The mode is disabled while you are using single
sheets.
Removing continuous paper
1. After you finish printing, tear-off all printed pages using the
tear-off function.
2. Press the Load/Eject button to feed the continuous paper
backward out of the printer and into the standby position.
3. To completely remove continuous paper from the printer,
open the sprocket covers. Remove the paper from the tractor
unit, and then close the sprocket covers.
Using Continuous Multipart Forms
Your printer can use continuous multipart forms with up to six
parts including the original. You can use carbonless or carbon-
backed multipart forms.
Caution:
Do not use carbon-interleaved multipart forms.