Filter
Top Products
3-20 Using the Printer Software
Using the EPSON Remote! Utility
The EPSON Remote! utility allows you to easily change the
printer’s default settings from your computer’s DOS prompt.
Installing EPSON Remote!
Follow the steps below to install EPSON Remote!
Note:
If you want to install EPSON Remote!, you must start your computer
in DOS mode. Do not open a DOS window from Windows.
1. Insert the printer software CD-ROM in a disk drive.
2. At the DOS prompt, type D:\ENGLISH\SETUP. (If you
inserted the disk in a drive other than drive D, substitute the
appropriate letter.) Then press Enter.
3. Select your printer’s name in the Printer Model window and
press Enter. C:\EPUTIL appears as the default directory.
4. Press Enter again. The EPSON Remote! utility is copied to the
C:\EPUTIL directory.
Accessing EPSON Remote!
To access EPSON Remote!, type C:\EPUTIL\PRNSET at the DOS
prompt and press Enter. Then follow the on-screen instructions
to use this utility. You can also access EPSON Remote! by typing
C:\EPUTIL\PANEL at the DOS prompt and pressing Enter. The
PRNSET and PANEL access methods differ slightly. The PANEL
method opens a condensed version of EPSON Remote! that only
provides the most often used settings.