Filter
Top Products
4109192 Rev.0 4109192 Rev.0 4109192 Rev.0 4109192 Rev.0
1-B C 1-B M 1-B Y 1-B K
43
4
Connect your camera’s USB cable to your camera
and the EXT. I/F port on the back of
PictureMate.
5
Use your camera’s controls to select and print
photos on PictureMate. (See your camera manual
for instructions.)
Note: You can select default print settings that are used if
the camera’s settings are not selected. Press the
Menu
button, select
Setup
, and then select
Direct Print
Settings
.
6
When you are finished, disconnect your camera
from PictureMate before inserting a memory card
in PictureMate.
Printing Wirelessly From a Bluetooth
Device
You can print photos wirelessly from your
Bluetooth-enabled PDA, cell phone, or
computer when you use the optional Epson
Bluetooth Photo Print Adapter. The adapter
(part# C12C824383) is available from your
local reseller or Epson (see page 68).
Note: While PictureMate complies with the Bluetooth
specification, it is not guaranteed to work with all devices
enabled with Bluetooth wireless technology. Make sure your
photos meet the requirements listed on page 4.
1
Make sure PictureMate is on but not printing.
Caution: Do not connect or remove the Bluetooth Photo
Print Adapter while it is communicating with a device or
while PictureMate is printing; this may cause PictureMate
to malfunction.
PictureMate.book Page 43 Thur sday, January 18, 2007 4:43 PM