Filter
Top Products
4109192 Rev.0 4109192 Rev.0 4109192 Rev.0 4109192 Rev.0
1-B C 1-B M 1-B Y 1-B K
61
4
Press u or d to highlight Auto Cleaning, then
press OK. You see a confirmation screen:
5
Press OK again to clean the print head. Cleaning
takes about 60 seconds. PictureMate makes some
noise and you see a Cleaning message.
When cleaning is complete, PictureMate prints a
nozzle check pattern.
6
Check the pattern to see if there are any gaps in
the lines.
● If the pattern is okay, press Yes to finish.
● If the pattern has gaps, press No to clean the
print head again. You may need to clean it
two or three times before the nozzles are
clean.
If you don’t see any improvement after cleaning three
times, see “Print Quality Problems” on page 65.
Note: You can run a nozzle check before you clean the print
head. Follow steps 1 through 3 on page 60. Then select
Nozzle
Check
.
Okay
Needs
cleaning
PictureMate.book Page 61 Thur sday, January 18, 2007 4:43 PM