Filter
Top Products
ESCb
Format:
Set Vertical Tabs in Channels
ASCII code: ESC b c nl n2 ... ... ... 0
Decimal:
27 98 c nl n2 ... ... ... 0
Hexadecimal: 1B 62 c nl n2 ... ... ... 00
Comments:
Functions the same as ESC B, except that the variable c selects a
channel for the vertical tabs, which must be between O-7. Therefore,
up to eight sets of vertical tabs can be set. The channels are selected
by ESC/.. To clear the tabs in channel c use ESC b c 0.
ESC/
Select Vertical Tab Channel
Format:
ASCII code: ESC / c
Decimal:
27 47 c
Hexadecimal: 1B 2F c
Comments:
This command is used to select the vertical tab channel, with the
value of c from O-7. All subsequent VT commands use the channel
selected by this command.
Horizontal Motion
Margins
ESC 1
Format:
Set Left Margin
ASCII code: ESC I n
Decimal:
27
108 n
Hexadecimal: 1B 6C n
Comments:
Sets the left margin to
n
columns in the current pitch, with the
maximum value of
n
as follows: 134 in 10 pitch, 229 in condensed, 160
in 12 pitch, and 270 in condensed 12 pitch. Settings made in the
proportional mode are treated as 10 pitch. This command clears
previous tab settings
and
all previous characters in the print line. Use
lowercase 1 (for left), not the numeral one. The minimum space between
the margins is the width of one normal 10 pitch character.
Command Summary
A-17