Filter
Top Products
ESC SP (space)
Format:
Set Intercharacter Space
ASCII code: ESC SP n
Decimal:
27 32 n
Hexadecimal: 1B 20 n
Comments:
Sets the amount of space added to the right of each character, in
addition to the space already allowed in the design of the character.
The number of dots is determined by
n,
which should be from O-127.
The space units are shown
below
in units of l/100.
MODE
Draft
10cpi, 12cpi, 15cpi
10 cpi or 12 cpi condensed
Letter Quality
10 cpi, 12cpi. 15cpi
1Ocpi or 12cpi condensed
Proportional
Proportional super/subscript
Proportional condensed
UNITS
120
240
180
360
180
180
360
Character Tables
ESC t
Select Character Table
Format:
ASCII code: ESC
n
Decimal:
27
116 n
Hexadecimal: 1 B
74
n
Comments:
Selects the character table used by codes 128-255. Selecting Epson
Character Graphics does not disable italic printing. Italic printing can
still be selected by ESC 4. The following values can be used for
n:
0: Selects Italic character table.
1: Selects Epson Graphic character
table.
The characters ‘0” and ‘1” can also be used. The Italic and Epson
Graphic character tables can also be selected with the SelecType CC
Table function. See Appendix B for printouts of the tables.
A-30
Command Summary