Filter
Top Products
When you press the two ENTER
SelecType
buttons, the four control
panel buttons switch to their SelecType labels. The control panel
buttons cannot be used for their other labeled functions until you exit
SelecType.
Entering SelecType
1. Make sure that the power is on, and that the printer is on line. (The
green ON LINE, POWER, and READY lights are on, and the display
reads [ON LINE].)
2. To enter SelecType, press the two ENTER
SelecType
buttons at the
same rime.
The display reads [SelecType MODE].
SelecType
MODE
Enter SelecType
Figure 2-1.
The SelecType panel
2-2
SelecType