Filter
Top Products
*CHANGE MACRO
The 14 settings and their options shown in Table 2-1 control printing
and printer operation. These settings are the heart of the SelecType
system. (There are additional settings that can be changed in the
*Change Defaults mode.) If you are unfamiliar with any of the terms
in
the table, consult the Glossary in the
back
of this manual.
Table 2-1. Printer settings and options
Select with SETTING
Change with OPTION
PRINT QUALITY
Draft. LQ
FONT
Roman, Sans Serif. Courier. Prestige, Script
PITCH
10CPI, 12CPI, 15CPI. Proportional
CONDENSED
On. Off
FORM LENGTH
xx.x” (4"--22" in 1/2” steps)
1" SKIP
On. Off
RIGHT MARGIN
xxx (Left margin + 1-136)
LEFT MARGIN
xx (0--80)
CG TABLE
Italic. Graphic. Download
COUNTRY
USA. France. Gem-any UK. Denmark 1, Sweden,
Italy. Spain 1, Japan, Norway, Denmark 2, Spain 2,
L. America
PRINT DIR
Bi-D. Uni-D
HALF SPEED On. Off
SHEET FEEDER
Off. Single. Double
I
-DEFAULT BIN
1, 2
I
‘Default bin IS displayed only when double-bin sheet feeder is selected,
The LQ-2500 uses a list of these settings, called the current printer
settings, whenever it prints. This means there are actually six lists of
settings stored in the printers memory-the current printer settings, the
settings for each of the four macros, and the default settings (see the
following section on *Change Defaults for more information).
2-8
SelecType