Filter
Top Products
1 FEATURES
S5U1C17801T1100 HARDWARE MANUAL
EPSON
1
(SOFTWARE EVALUATION TOOL FOR S1C17801)
1 Features
S5U1C17801T1100 (Software eValuation Tool for S1C17801. Hereafter referred to as SVT17801)is an evaluation
board for MCU S1C17801 manufactured by SEIKO EPSON.
The SVT17801, consisting of the three boards, i.e., CPU, ICD and LCD, can debug software by connecting to
the ICD and CPU boards without using ICD or other debug tool. By connecting to the CPU and LCD boards, the
SVT17801 can also be used for simple evaluation of LCD panel display.
In addition, serial port, AD input port, and other expansion interfaces built in the SVT17801 allow customers original
expansion boards to connect with the SVT17801.
CPU Board
CPU S1C17801
Input power voltage +5.0V (DC)
Regulator output voltage +3.3V
CPU Input Clock OSC1:32.768kHz
OSC3:48MHz
Built-in Functions/Devices - Reset switch
- Expansion interface connectors (LCD, GPIO, UART, I
2
C, AD)
- ICD board connector
• SRAM (16Mbit)
• NOR Flash (64Mbit)
• NAND Flash (2Gbit)
• EEPROM (256Kbit)
- Battery backup control circuit/Power switch
- Key input circuit (6 keys)
- Rotary encoder with switch
- Status display LED (tri-color LED/mono-color LED x 2)
- Infrared LED/Receiver module
- AudioCodec
- USB miniB type connector
- MMC card socket
ICD Board
Interface with PC USB 1.1
Supply voltage USB bus power (On-board regulator output voltage of 3.3V)
Built-in Functions/Devices - Status display LED (tri-color)
- Reset switch
- CPU board connector
LCD board
LCD panel module 3.5 inch STN QVGA 320 x 240 dots B&W panel
Membrane type touch panel