Filter
Top Products
Code Condition/solution
208 The fax could not be sent to some of the specified recipients.
Print a fax log to check which recipients failed to receive the fax. If the Save Failure Data
setting is turned on, you can resend a fax from Job Monitor in the Status Menu.
301 There is not enough storage space available to save the data in the external memory
device. Clear space on the device or use a different device.
401
302 The external memory device is write-protected. Disable write protection.
402
303 No folder is available for saving the scanned file. Create a folder or use a different
memory device.
304 The external memory device has been removed. Reinsert the device.
404
305 An error occurred while saving data to an external memory device. Reinsert the memory
device or use a different device.
405
306 The product's memory is full. Wait until current jobs are finished processing.
311 A DNS error has occurred. Check the DNS settings for the server, computer, or access
point. DNS settings for the server can be checked from the DNS Server option in the
321
Setup menu.
411
421
312 An authentication error has occurred. Check the Server Settings in the Setup menu.
412
313 A communication error has occurred. Check the network connection or Server Settings in
the Setup menu.
413
314 The data size exceeds the maximum size for the attached files. Increase the Attached
File Max Size setting in the scan settings or lower the file size of the scanned image.
315 The memory is full. Retry after other ongoing jobs have finished.
327
322 An authentication error occurred. Check the Location settings.
351