Epson Series II Computer Monitor User Manual


 
Important Safety Instructions
Read all of these instructions and save them for later reference.
Never push objects of any kind into the monitor through cabinet
slots.
Do not expose the monitor to liquids, such as rain or spills.
Because of the monitor’s weight, two people are required to lift it;
do not lift it alone. Do not place the monitor on the computer.
Do not place the monitor on an unstable cart, stand, or tabIe, and
be careful not to drop it.
Do not place the monitor near heating appliance or in direct
sunlight. Intense heat can damage the monitor’s circuitry.
Slots and openings on the top and back of the cabinet are provided
for ventilation; do not block or cover these openings.
I0. Be careful not to damage the power cord or plug.
11. Voltages outside the monitor’s specified line voltage range may
harm the monitor. The monitor should be operated from the type
of power source indicated on the rear panel marking Iabel.
12. Plug the power cord only into a grounding-type wall outlet.
13. Make sure the combined amperage rating for all products
plugged into the
wall outlet used for the monitor does not
exceed the amperage rating of the wall outlet.
11. Do not replace the interface cable with a non-shielded cable.
15. Unplug the monitor from the wall outlet and the computer before
cleaning. Use a damp cloth for cleaning.