Filter
Top Products
4. Click the display icon that appears in the configuration box after you have created a
display in step 3 (
a
in figure 20). The display configuration page appears.
2
1
Figure 20. Source Configuration
5. Click the Video Source drop-down box and then select the video source (
b
).
• Choose rtp(m) for multicast RTP streaming.
NOTE: rtp(m) is available only if you have enabled multicast streaming. See
“Enable multicast streaming“.
• Choose rtp for unicast RTP streaming.
• Choose tcp for unicast TCP streaming.
NOTE: See “Data Transport Methods“ for more information.
6. Click the Save All tab to save the configuration changes.
NOTE: If you do not click Save All, the configuration settings are lost when power
is cycled on and off.
VN-Matrix 325 Serial Digital Over IP CODEC • Installation and Setup 29