Filter
Top Products
b Test button — Press and hold to suspend the active stream of the encoder and display
a test pattern on the SDI Out connector (item
f
in figure 2 and on page 7). Release to
end the test pattern. See “Test Pattern“ in the “Reference Information” section for the
test patterns.
c Reset button (to the left of the LAN 2 LED) — Insert a straightened paper clip into
the hole on the front panel and press and release to reboot the operating system.
Network Interface
Once all VN-Matrix 325 devices have been correctly set-up for and connected to a network,
any further configuration and operation is via the network interface (built-in HTML pages) of
the unit designated as the controller. The pages can be viewed by any web browser, such as
Mozilla Firefox, version 4.0 or newer (preferred), or Microsoft Internet Explorer, version 6.0
or newer, provide access to various system parameters.
NOTE: Whichever browser you use, it must be configured to accept cookies and be
JavaScript-enabled.
See “Startup and Login“, on page 25, to access the network interface and down load the
device list page (see figure 23).
Figure 23. Device List Page
VN-Matrix 325 Serial Digital Over IP CODEC • Operation 32